Mic Preamp, Power Supply and Electronic Kits
Home > Electronics DIY Projects

All Mic Preamp Kits and Power Supply Kits come with double-sided PCB, with plated through holes, top silkscreen and solder mask. Professionally Designed and Manufactured PCB.

 

 

DIY Mic Preamp Kits and more at FiveFish Audio.
Visit us at www.fivefishaudio.com

Current and Completed Audio Projects
Neve 1272 Mic Preamp -
A Class A mic preamp based on classic Neve console. 		UREI 1176 Clone Compressor
I'm building an 1176 clone Compressor. Click here for details. 		Melcor Discrete Op-Amp -
Inspired by API mic preamp's use of discrete opamp. Using transistors and discrete components. About 1" square PCB. 		SSL Buss Compressor
This is a clone of the stereo bus compressor used in SSL boards. This is not a kit, but PCB was readymade.
Build your own Stereo Mic for less than $10
Build a stereo mic using electret condenser microphones. 		MIDI Controller
Building my own MIDI controller. Knobs, knobs, and more knobs. 		PRE-1048 Mic Preamp - Class A, discrete My take on a Class A mic preamp inspired by Neve design. All discrete with transformer, everything on a single PCB. Sony MXP-3000 Mic Preamp -
Preamps used in the Sony MXP console.. using opamps and transformers. PCB bought on eBay.
Dissecting a Behringer Mixer
Autopsy of a Behringer mixer. What's inside this thing? 		Unbalanced to balanced line converter
Convert unbalanced lines to balanced lines using this simple circuit. 		Unbalanced to balanced line converter - Part 2
Using a Burr-Brown DRV134/135 to convert unbalanced to balanced signals 		ISO BOX - Unbalanced to balanced line converter
Reduce hum and noise by using an audio transformer to offer complete isolation.
Altec 1599A Mixer upgrade
Convert an old Altec 6-to1 mixer into 6-in, 6-out vintage mic preamp. Design your own PCB. 		Inside the KRK RP8
My KRK is broke. Studying the PCB design and fixing the problem. 		Yamaha PM1000 Rack Preamp -
Convert a PM1000 channel strip PCB to a rack-mounted mic preamp		 McCurdy Amp PCB Board
A cool circuit made by this famous Canadian manufacturer.

More DIY Projects

Power Supply +/-18V with
+48VDC phantom power -
A project for supplying power to audio circuits, including +48V phantom. From etching the PCB, to soldering. 		Canon EOS Camera Cable Release/Remote
How to DIY a camera cable release/remote 		Digital Preamp Project
This is a DIY project attempting to build a digital interface for analog preamps.		 XLR/TRS Cable
How to build your own cable
DIY Projects How to build your own stereo microphone for less than $10
Build your own MP3 Player How to calibrate your recording levels
How to create professional looking chassis MIDI Drums using DIY triggers
PCB CAD Design software DIY Headphone Amp Gallery
DIY: Building an 1176 Compressor Attention: Moogheads... Builld your own Modular Synths
DIY API Preamp Project Build your own Stompboxes!
Electronics Books for the Beginner  

Other Audio Related Articles

What is a decibel... dB, dBm, dBu, dBV, drum n Bass? How to setup MIDI over LAN using OSX
What is a decibel... Part 2 FREE! Music Software for Mac OSX and PCs
Setup MIDI on your Mac OSX Computer How to Connect Hardware Effects Processors (Reverb, Chorus, Delay, Flanger)
What are the differences between compressors? Tubes, Solid State, VCA All About Microphone Pickup Patterns, Cardioid, Omni, Bi-Directional, etc...
What is the difference between a Limiter and a Compressor Difference between condenser and dynamic microphones
What's inside a passive direct box? How to connect a hardware compressor
How to use compressors What is dynamic range?

BLOG Sites

Check out my new DIY-Central.com Blog site, and HomeStudioGuide.com website..

Electronics Books

Do you want to learn Electronics and build projects like this? I've compiled a list of books that will help you learn Electronics and give you the knowledge and confidence to do your own DIY projects.

Privacy Policy